CCEWOOL® research series ceramic fiber aluminum foil blanket is mainly used for insulation and fire resistant application in fire protection pipe, flue and vessel.
Adopting European standard aluminum foil, the aluminum foil is thin and has good conformability. Being directly bond without using binders can connect the CCEWOOL ceramic fiber blanket with the aluminum foil better. This product is easy to install and more durable.
CCEWOOL® research series ceramic fiber aluminum foil blanket is mainly used for insulation and fire resistant application in fire protection pipe, flue and vessel.
Adopting European standard aluminum foil, the aluminum foil is thin and has good conformability. Being directly bond without using binders can connect the CCEWOOL ceramic fiber blanket with the aluminum foil better. This product is easy to install and more durable.
Excellent chemical stability;
Excellent thermal stability;
Excellent tensile strength;
Low thermal conductivity;
Low heat capacity;
Excellent insulation properties;
Good sound absorption.
Cable bracket, duct
Railroad oil tanker
Vessel
Vessel wall and board
Expansion joint
Structural steel panel
Seals for fireproof door
Electric circuit protection
Chimney liner insulation
General high temperature insulation, exhaust ducts of commercial and industrial application
High temperature ventilation ducts, kitchen exhaust hoods and fume pipes, supply and exhaust air vents
Fire protection, Ships engine rooms, exhaust chimneys
Air ventilation duct enclosure, through penetration fire stop systems
Electrical ducts, protection of electrical wiring
1. Using CCEWOOL® ceramic fiber blanket, inside needle technology offers higher tensile strength.
2. One side, two sides, and six sixes aluminum foil ceramic fiber blanket are all available.
3. Aluminum foil’s fire proof property is qualified with ASTM E119, ISO 834, UL 1709 standard.
|
CCEWOOL® RESEARCH series ceramic fiber blanket with alumina foil |
|||||
|
Classification temperature |
1260STD (2300℉) |
1260 HP (2300℉) |
1400AZ |
1430HZ |
|
|
(2550℉) |
(2600℉) |
||||
|
Operation Temp(℃) |
1050 |
1100 |
1200 |
1350 |
|
|
Density (kg/m3) |
64/ 96/ 128/160 （4,6,8,10lb/ft3） |
||||
|
Permanent Change on Heating (%), EN1094-1 |
|||||
|
After 24 hours @950℃ |
- |
- |
- |
- |
|
|
@1000℃ |
1.5 |
1.5 |
- |
- |
|
|
@1100℃ |
2.5 |
2.2 |
1.5 |
- |
|
|
@1200℃ |
3 |
3 |
2 |
1 |
|
|
@1300℃ |
- |
- |
3 |
2 |
|
|
@1400℃ |
- |
- |
- |
3 |
|
|
Tensile Strength(Kg/m3), EN1094-1 KPa |
|||||
|
Density 64kg/m3 |
30 |
30 |
30 |
30 |
|
|
96kg/m3 |
50 |
50 |
50 |
50 |
|
|
128kg/m3 |
70 |
70 |
70 |
70 |
|
|
160kg/m3 |
100 |
100 |
100 |
100 |
|
|
Heat Conductive Co-efficient W/(m·k)(128kg/m3) |
|||||
|
Temperature |
@200℃ |
0.07 |
0.06 |
||
|
@400℃ |
0.12 |
0.11 |
|||
|
@600℃ |
0.2 |
0.16 |
|||
|
@800℃ |
0.3 |
0.23 |
|||
|
@1000℃ |
0.45 |
0.4 |
0.43 |
0.35 |
|
|
Chemical Composition of ceramic blanket (%) |
|||||
|
Al2O3 |
45-46 |
47-49 |
45-46 |
35-38 |
|
|
Al2O3+SiO2 |
≥98 |
≥99 |
- |
- |
|
|
ZrO2 |
- |
- |
5 |
15-17 |
|
|
Al2O3+SiO2+ZrO2 |
- |
- |
≥99 |
≥99 |
|
|
Fe2O3 |
≤0.8 |
≤0.2 |
≤0.2 |
≤0.2 |
|
|
Na2O+K2O |
≤0.3 |
≤0.2 |
≤0.2 |
≤0.2 |
|
|
CaO+MgO |
≤0.1 |
≤0.1 |
≤0.1 |
≤0.1 |
|
